代做Integrated Design Project 1A-2024-2025代写Web开发

日期：2025-09-30 04:27

Integrated Design Project 1A-2024-2025

Supplementary Assignment-Design Project

Introduction

The aim of this assignment is to develop your engineering design skills using CAD software. It is worth 60% of the overall module mark.

Learning Outcomes

As a result of undertaking this assignment you should be able to:

Use creativity to produce innovative designs

Manage the design process from idea to CAD design

Use CAD software to design engineering components

Prepare a general arrangement drawing

Prepare a detailed component drawing

Reflect on the inclusivity and accessibility of your design

Design Brief

You are required to design a simple pneumatic actuator using Fusion 360 Computer Aided Design software. You can select your design from one of the following designs:

You are required to produce a full design so that the volumetric dimensions are 550 mm x 300 mm as you wish. You will need to specify appropriate materials. The middle section should include the x 250 mm. You are free to choose dimensions of all the other parts. You can also change the shape frame. design and the yoke design as it is shown in the following figure.

Submission details

Only the following should be submitted:

·     1  page  University  of  Birmingham  Assessment  and  Feedback  Student  Template  (see canvas)

·  1 page hand sketching of the assembly providing general dimensioning.This must be clearly legible or will not be marked.

·     an  engineering  drawing  of the  assembly  in 3d  angle  projection which   includes   all essential parts(1-page A4 maximum)

·     an  engineering  drawing  of  the  assembly  in  isometric  projection which   includes   all essential parts(1-page A4 maximum)

·     detail  engineering  drawings,in  3   angle  projection,of  two  different  parts  (1-page  A4 maximum for each part).You can select two different parts between frame,yoke,spring, casing,power cylinder or spring cartridge.

·     1 page Reflection piece(max 300 word)on the inclusivity and accessibility of your design and how it can be improved.