COMP10002代写、C/C++编程语言代做

日期：2024-05-21 09:44

The University of Melbourne

School of Computing and Information Systems

COMP10002 Foundations of Algorithms

Semester 1, 2024

Assignment 2

Due: 4pm Tuesday 21 May 2024

Version 1.0

1 Learning Outcomes

In this assignment you will demonstrate your understanding of structures, linked data structures, and algorithm

time complexity analysis. You will further extend your skills in program design and implementation.

2 The Story...

In Assignment 1, we have extended your algorithmic searching capability to multidimensional numeric data.

In this assignment, we will continue to add text searching to your arsenal. We continue using point of interest

(POI) search as the background application to minimise context switching. However, the algorithms

you will implement are generic to text search problems and serve as fundamental building blocks of search

engines such as Google or Bing. If you have missed Assignment 1, you can still compete this assignment –

it would be helpful to revisit the ffrst two pages of the Assignment 1 speciffcation to understand the context

in this case.

In Assignment 1, we have assumed that all POIs given are relevant to the queries (e.g., they are all cafes),

and we only need to fflter them based on the POI locations which are numeric properties. In reality, there

are POIs of many different categories in the same area, and only few are relevant to a query. See Figure 1

for example. There are not only cafes in the Melbourne CBD but also shops, supermarkets, hotels, post

offfces, a cathedral, etc. When a user queries for “cafes”, none of the POIs in the other categories need to

be considered. In this assignment, we will implement an algorithm to quickly fflter out POIs of irrelevant

categories (or web documents in search engines, users in social network searches, etc.).

Figure 1: POIs of different categories in Melbourne CBD

13 Your Task

The input POI and query dataset in this assignment is expanded to include POI category information. The

input still contains two sections, with a sample input shown below:

1. At least 1 and up to 50 lines of POI records. Each line represents a POI, which starts with an unique

integer POI ID of up to two digits (the POI IDs are just the line numbers, to simplify the assignment).

Each POI record then contains two real numbers representing the POI coordinates in the x- and ydimensions.

After that, each POI record contains at least 1 and up to 5 category keywords (“category”

for short hereafter) separated by single whitespace characters. Each category is a string of at least

1 and up to 20 lower-case English letters. At the end of each line, there is a special character ‘#’ to

indicate the end of the line – this is used to simplify input processing for the assignment; it is not part

of the POI categories.

You may assume that there are no repetitions among the categories of a POI. In the sample input

below, POI #0 has coordinates (16.4, 69.4), and its categories are petrol, atm, and carwash.

2. At least 1 and no predeffned maximum number of lines of queries. Each line represents a query, which

starts with four real numbers representing the query range (xlb, ylb, xub, yub) as in Assignment 1. Recall

that xlb and ylb represent the lower bounds in the x- and y-dimensions of the query range, while xub

and yub represent the respective upper bounds. Intuitively, each query range is a rectangle whose

bottom left corner is at (xlb, ylb) and top right corner is at (xub, yub). You may assume that xlb < xub

and ylb < yub always hold. Each query line is then followed by a query category, which is a string of

at least 1 and up to 20 lower-case English letters.

All coordinate values are in (0, 100). Note that there is a line with 10 ‘#’s to separate the two input sections.

0 16.4 69.4 petrol atm carwash #

1 88.7 13.3 atm #

2 19.5 78.5 shop supermarket atm coles woolworths #

3 85.1 96.1 supermarket #

4 15.4 22.3 cinema movie theatre #

5 22.2 73.5 gas petrol carwash #

6 97.3 68.1 petrol carwash #

7 80.0 32.7 carpark cafe shop #

8 46.8 43.3 hotel atm restaurant carpark #

9 87.3 42.3 cafe atm #

10 87.5 34.6 atm cafe shop #

11 24.7 4.4 theatre cinema atm carpark movie #

##########

11.8 3.5 53.5 28.5 cinema

19.7 58.6 47.1 66.8 atm

16.9 67.6 74.8 93.4 petrol

49.0 70.7 54.9 74.9 supermarket

75.1 25.1 99.9 49.9 cafe

You may assume that the test data always follows the format above. No input validity checking is needed.

You will be given a skeleton code ffle named program.c for this assignment on LMS. The skeleton code

ffle contains a main function that has been partially completed. There are a few other functions which are

incomplete. You need to add code to all the functions including the main function for the following tasks.

3.1 Stage 1: Read the POIs (Up to 5 Marks)

Your ffrst task is to add code to the stage_one function to read the POI records. You need to deffne a

struct named poi_t to represent a POI, and an array of this struct type to store all POI records. This

stage outputs (1) the number of POI records read, (2) the POI with the largest number of categories, and

(3) the categories of this POI. If there is a tie, print out the POI with the smallest ID among the tied ones.

Hint: Note the newline character ‘\n’ at the end of each input line if you use getchar to read the categories.

The output for this stage given the above sample input is shown in the next page (where “mac:” is the

command prompt).

2mac: ./program < test0.txt

Stage 1

==========

Number of POIs: 12

POI #2 has the largest number of categories:

shop supermarket atm coles woolworths

Like in Assignment 1, we will again use input redirection to feed test data into your program. Thus, you

should still use the standard input functions such as scanf or getchar to read the data. You do not need

to (and should not) use any ffle operation functions such as fopen or fread. Your program should not print

anything except for the data requested to be output (as shown in the output example).

You can also modify the stage_one function to read all input in one go. You can (and should) create further

functions to complete the tasks when opportunities arise.

3.2 Stage 2: Read and Process the Queries (Up to 10 Marks)

Add code to the stage_two function to read the queries. You will need to deffne another struct named

query_t to represent a query, and a linked list to store the input list of queries. You should adapt the

linked list structure and code given in the skeleton code for this purpose. Note: If you are not conffdent

with linked lists, you may use an array of the query_t type instead, assuming up to 20 queries. This will

cost a 2-mark deduction but will not impact the rest of your assignment implementation.

Then, add code to the process_queries function to go through the list (or array) of queries. For each

query, calculate and output the IDs of the POIs that are within the query range and match the query

category. You may use linear search to go through all POIs and their categories to process each query, and

do not need to use the advanced search algorithms described in Assignment 1.

We say that a POI at (x, y) is within a query range (xlb, ylb, xub, yub) if the following inequalities hold:

xlb ≤ x ≤ xub and ylb ≤ y ≤ yub (1)

Further, we say that a POI matches a query category if one of the categories of the POI is exactly the same

as the query category. The output for this stage given the above sample input should be:

Stage 2

==========

POIs in Q0: 4 11

POIs in Q1: none

POIs in Q2: 5

POIs in Q3: none

POIs in Q4: 7 9 10

Here, Qi to refer to the i-th input query. If there is no POI that satisffes a query, we output “none”. As an

example, for Q2, even though both POIs #2 and #5 are within the query range, only POI #5 matches the

query category petrol. Thus, only POI #5 is outputted.

3.3 Stage 3: Compute the Unique POI Categories (Up to 15 Marks)

Next, we consider a smarter strategy to search the POIs based on their categories. Stage 3 is a preparation

step for this purpose. Add code to the stage_three function to identify and output the list of all unique

POI category strings that have appeared in the input POI records. The POI categories should be outputted

in the order that they appear in the input. To simplify the assignment, you may assume that there are at

most 50 unique POI categories in the input, and you may use an array of strings to store the unique POI

categories. Given the sample input above, the output of this stage is shown below (5 categories per line).

Stage 3

==========

15 unique POI categories:

petrol, atm, carwash, shop, supermarket

coles, woolworths, cinema, movie, theatre

gas, carpark, cafe, hotel, restaurant

3Hint: Study words.c (https://people.eng.unimelb.edu.au/ammoffat/ppsaa/c/words.c) for how to

identify all unique words from input data and store them into an array.

3.4 Stage 4: Construct an Inverted Index (Up to 20 Marks)

Finally, add code to the stage_four function to construct an inverted index over the POI as follows:

1. Deffne a struct type named index_t of three ffelds:

• category, which is a string of up to 20 lower-case English letters;

• pois, which is an int array to store the IDs of all POIs that match the category; and

• num_matched_pois, which is the number of POIs that match the category.

For example, as shown in the sample output below, category cafe matches with POIs #7, #9, and #10.

These three POI IDs are supposed to be stored in the pois array corresponding to category cafe,

while num_matched_pois is 3.

2. Create an array of index_t type. Let us name this array index. This array will have the same size

as the array of unique POI categories created in Stage 3. Each element of the index array stores a

unique POI category in its category ffeld.

3. Sort the index array created in Step 2, in ascending alphabetical order (that is, dictionary order) of

the POI categories stored in the category ffeld of each array element.

Hint: You may adapt the insertion sort code from Assignment 1 for this step, or use the qsort function

from stdlib.h (see https://people.eng.unimelb.edu.au/ammoffat/ppsaa/c/callqsort.c for a

code example).

4. Go through the array of all POIs constructed in Stage 1, and each POI’s categories. For each category

(denoted by cat) of a POI, ffnd the element of the index array whose category ffeld matches cat.

Once such an element is found, add the ID of the POI to the end of the pois array of this element.

Hint: You may use either linear search or binary search for this step. If you use binary search, you

may adapt the binary search code from Assignment 1, or use the bsearch function from stdlib.h.

The output of this stage is the content of the index array, where each array element is printed in one line.

Given the sample input above, the output of this stage is as follows.

Stage 4

==========

atm: 0 1 2 8 9 10 11

cafe: 7 9 10

carpark: 7 8 11

carwash: 0 5 6

cinema: 4 11

coles: 2

gas: 5

hotel: 8

movie: 4 11

petrol: 0 5 6

restaurant: 8

shop: 2 7 10

supermarket: 2 3

theatre: 4 11

woolworths: 2

Query algorithm (for analysis and not for implementation). Once the inverted index is constructed,

when a query comes, we can run a binary search over the inverted index (that is, the index array) to ffnd

the array element whose category ffeld matches the query category. Then, we can perform a linear search

over the pois array of the found index array element to identify the POIs in the query range. For example,

for query Q4, we only need to examine POIs #7, #9, and #10.

At the end of your submission ffle, you need to add a comment that states:

1. the worst-case time complexity to process a single query using the linear search algorithm of Stage 2,

2. the worst-case time complexity to process a single query using the query algorithm described in the

paragraph above (without actually implementing it), and (continued on next page)

43. the reason why the two algorithms have those time complexities.

In your analysis, use N to denote the number of POIs, C to denote the maximum number of categories

per POI, L to denote the maximum length of a category, and U to denote the number of all unique POI

categories.

4 Submission and Assessment

This assignment is worth 20% of the ffnal mark (5% per stage). A detailed marking scheme will be provided

on LMS.

Submitting your code. You should put all your code for the assignment into a single ffle named

program.c. To submit your code, you will need to: (1) Log in to LMS subject site, (2) Navigate to

“Assignment 2” in the “Assignments” page, (3) Click on “Load Assignment 2 in a new window”, and

(4) follow the instructions on the Gradescope “Assignment 2” page and click on the “Submit” link to make

a submission. You can submit as many times as you want to. Only the last submission made before the

deadline will be marked. Submissions made after the deadline will be marked with late penalties as detailed

at the end of this document. Do not submit after the deadline unless a late submission is intended. Two

hidden tests will be run for marking purposes. Results of these tests will be released after the marking is done.

You can (and should) submit both early and often – to check that your program compiles correctly on

our test system, which may have some different characteristics to your own machines.

Testing on your own computer. You will be given a sample test ffle test0.txt and the sample output

test0-output.txt. You can test your code on your own machine with the following command and compare

the output with test0-output.txt:

mac: ./program < test0.txt /* Here ‘<’ feeds the data from test0.txt into program */

Note that we are using the following command to compile your code on the submission testing system (we

name the source code ffle program.c).

gcc -Wall -std=c17 -o program program.c -lm

The ffag “-std=c17” enables the compiler to use a modern standard of the C language – C17. To ensure

that your submission works properly on the submission system, you should use this command to compile

your code on your local machine as well.

You may discuss your work with others, but what gets typed into your program must be individual work,

not from anyone else. Do not give (hard or soft) copies of your work to anyone else; do not “lend” your

memory stick to others; and do not ask others to give you their programs “just so that I can take a look

and get some ideas, I won’t copy, honest”. The best way to help your friends in this regard is to say a

very ffrm “no” when they ask for a copy of, or to see, your program, pointing out that your “no”, and their

acceptance of that decision, is the only thing that will preserve your friendship. A sophisticated program that

undertakes deep structural analysis of C code identifying regions of similarity will be run over all submissions

in “compare every pair” mode. See https://academichonesty.unimelb.edu.au for more information.

Deadline: Programs not submitted by 4pm Tuesday 21 May 2024 will lose penalty marks at the rate

of 3 marks per day or part day late. Late submissions after 4pm Friday 24 May 2024 will not be accepted.

Students seeking extensions for medical or other “outside my control” reasons should email the lecturer at

jianzhong.qi@unimelb.edu.au. If you attend a GP or other health care professional as a result of illness,

be sure to take a Health Professional Report (HRP) form with you (get it from the Special Consideration

section of the Student Portal), you will need this form to be fflled out if your illness develops into something

that later requires a Special Consideration application to be lodged. You should scan the HPR form and

send it in connection with any non-Special Consideration assignment extension requests.

And remember, Algorithms are fun!

©2024 The University of Melbourne

Prepared by Jianzhong Qi

5