COMP1711 代写、代做 C++语言程序

日期：2024-08-11 01:16

Module code

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

Resit Assessment Brief

Procedural Programming

COMP1711

Resit – Carbon Capture Data Analysis

You should spend around 10-15 hours on this assessment. 100%

Via Gradescope.

Automated feedback through Gradescope

Amy Brereton

  Module title

     Assignment title

  This is a programming assignment. You will design and create a number of programs to solve a problem from your client.

 You are doing this assessment to develop your skills in software design and development.

   Assignment type and description

   Rationale

 Word limit and guidance

  Weighting

     Submission deadline

9th August 2024 @ 23:59 BST

There are no late submissions permitted.

  Submission method

  Feedback provision

      Learning outcomes

assessed

LO1: select appropriate data types to represent data.

LO2: apply problem solving techniques to develop a programming solution to real world problems.

LO3: design, implement, debug and test procedural programs.

  Module leader

  Other Staff contact

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

1. Assignment guidance

Scenario, Struct & tokeniseRecord()

You have been asked to work on a new sustainability project, exploring the effectiveness of new carbon- capture techniques by analysing data files produced by sensors.

The data is stored in comma separated value (csv) files, and each row in the file is in this format:

2023-09-01,08:15,150

· The first column represents the date (in YYYY-MM-DD format).

· The second column represents the time (8.15am in our example).

· The third column represents the units of carbon saved (measured in grams) since the last timestamp.

These files are valid if:

- They contain between 1 and 1000 records (inclusive)

- All carbon readings are positive

- The times and dates are valid

- There are no missing values.

To store this data, one of the other developers on your team has produced a custom struct which you can use to store the information for each row in the file:

typedef struct _CARBON_DATA {

   char date[11];

   char time[6];

   int carbon_units;

} carbonData;

And you have also been given the function tokeniseRecord() which is able to split records into their comma separated values – the README.md in the code folder has a brief explanation of how to use this function.

Development Process

It is recommended that you use Github Codespaces, which gives you access to a Linux virtual machine which can run from any internet connected device.

You should develop your code on a private repository to prevent others from accessing it.

You can also access the University’s virtual Linux desktop via:

https://feng-linux.leeds.ac.uk/

You will need to be running the PulseSecure VPN in order to access Feng: instructions here (you must be logged on to the IT service website to access)

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

2. Assessment tasks Task 1: Reading Data

Task 1 marks: 25 Expected time: 1 - 2 hours

To ensure that data can be correctly read in from the files, you will make a simple C program which is able to:

1. Read in the csv file (for this task, always named ‘CarbonData_2023.csv’)

o Youmayassumethatthisfilealwaysexistsandisalwaysvalidfortask1.

2. Store it in a suitably sized and structured array using the provided struct carbonData

3. Write the number of records in the file to the screen in this exact format (234 is just an example):

    Number of records in file: 234

4. Write to the screen the first three rows of the file in the following format:

    2023-09-01/07:30/300

    2023-09-01/07:45/400

    2023-09-01/08:00/600

Note that there are NO SPACES in the output string, each value is separated by a single forward slash ‘/’ with a single newline after each row.

How it’s marked:

All submitted code for all tasks is marked by an autograder which checks that your code meets the requirements from the brief. You will see a selection of tests when you submit your code, but some will not be visible to you.

 Each section is tested separately, and marks are available for each individual test.

SECTION

Reading in a new set of data from CarbonData_2023.csv

Printing out the correct first 3 rows

TASK 1 - TOTAL

MARKS AVAILABLE

2.5 marks

10 marks

25 MARKS

 Reading in the original CarbonData_2023.csv file

 2.5 marks

Printing out the correct number of records

10 marks

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

Task 2: Analysing Data Task 2 marks: 40

Expected time: 4 – 5 hours

Now that you have been able to read the data into an appropriate structure, you have been given the task of making a tool to analyse the data to give some useful statistics.

Follow good programming practices by structuring your program into two separate files:

CarbonDataStruct.h – A header file containing includes, the struct and any helper functions you'd like to include – the template includes tokeniseRecord().

CarbonAnalysis.c – A program file containing the code and functions needed to solve the given tasks.

Requirements:

The program should present a simple menu system to the user, offering the following functions:

A: Specify the filename to be imported. Implement error checking to handle incorrect filenames. B: Display the total number of records in the file.

C: Find the date and time of the timeslot with the fewest carbon units saved.

D: Find the date and time of the timeslot with the most carbon units saved.

E: Calculate the mean carbon units saved across all records in the file.

F: Identify the longest continuous period where the carbon units saved are below 100 grams. Q: Quit the program

When an option is selected, you code should show the correct data and then return to the menu.

You must not use ‘clear()’, ‘cls()’ or any other method which clears the screen – this causes issues with grading.

The data should be printed out in the formats below:

Option Example output

B Total records: 229

C Lowest units: 2023-09-01 14:20

D Highest units: 2023-09-01 18:00

E Mean units: 427

Note: This should be rounded to the nearest integer (1.4 -> 1, 1.5 -> 2)

F Longest period start: 2023-09-01 14:20 Longest period end: 2023-09-01 18:00

If the filename provided is invalid (does not exist/cannot open) – you must exit the program and return the value 1.

You do not need to check that the data inside is valid.

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

How it’s marked:

SECTION

B – Correctly counting records in a file

D – Finding row with highest carbon units

F – Finding the correct period of < 100 units.

TASK 2 - TOTAL

In order to make the autograder work correctly, you must follow the format and return codes given above.

You will get a small amount of feedback from the grader, but you should ensure that you have tested your code and its behaviour on a variety of different files – do not just rely on testing it on one file!

You can make the following assumptions for task 2:

- The data in the .csv file is always valid

- The user will always set a filename first (i.e the grader will always run ‘A’ first)

- The user will always input capital letters to the menu (i.e ‘A’, ‘B’, etc.)

- There will only be one instance of a count which is the lowest/highest

- There won’t be multiple periods < 100 of the same length.

MARKS AVAILABLE

5 marks

5 marks

10 marks

 A - File handling / dealing with invalid filenames

 5 marks

C – Finding row with lowest carbon units

5 marks

E – Finding correct mean average of units

10 marks

40 MARKS

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

Task 3: Presenting Data Task 3 marks: 20 marks

Expected time: 2 – 3 hours

This task requires you to write a utility program to output the data file sorted by descending order of carbon count in tab separated value (.tsv) format.

A .tsv file differs slightly from a .csv in that the delimiter (character which separates each piece of data) isn’t a comma (,) but a tab character. This has the special code \t which places an appropriate number of spaces when printed.

Your program should:

1. Ask for a filename and check the file exists.

2. Read the data file – and validate that the data is in the correct format

3. Write out the sorted data into a new file. The record with the highest carbon count should be at the

top and the record with the smallest carbon count should be at the bottom (descending order). If any records contain the same carbon count, these should be in chronological order (the one which occurred first should be at the top).

An example .tsv file is provided in the carbon_files/valid/ folder.

If the filename provided is invalid (does not exist/cannot open) – you must exit the program and return the value 1.

If the data format is wrong – you must exit the program and return the value 2.

If the input file is:

mydata.csv

The output file should be called:

mydata.csv.tsv

You should submit files:

CarbonDataStruct.h - containing any functions/structs you use in your source code. CarbonDataSorter.c - containing your source code.

How it’s marked: SECTION

Handling invalid data TASK 3 - TOTAL

MARKS AVAILABLE

6 marks

20 MARKS

  File handling

 2 marks

Correctly sorting and outputting the data

12 marks

Invalid File Specification

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

An invalid file will contain one or more of the following:

- Invalid carbon count: o Notanint

o<0

- Date which is invalid:

o Not in format YYYY-DD-MM

o Day>31or<0

o Month>12or<1

o YearBetween2000–2024(inclusive)

o Norequirementtovalidatenumberofdaysinmonth(i.e.2023-02-31isvalid)

- Time which is invalid:

o Not in format HH:MM

o Hours>23or<0

o Mins>59or<0

- A record with a missing or empty field

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

Task 4: Quiz Task 4 marks: 15

Expected time: 1 hour

For this task, you will need to complete the 15 question multiple-choice quiz on Gradescope.

There are 3 sections with 5 multi-choice questions each:

- Questions about a provided piece of C code

- Questions about programming in general

- Questions about code quality

Once you begin the quiz, you have 60 minutes to complete it. You only have one attempt to complete it, so be prepared in a quiet environment where you will be able to focus – you should also ensure you have a stable internet connection and a device with sufficient power for 60 minutes.

You may complete this part of the assignment at any time before the deadline.

This is an assessment, and therefore must be completed independently. You can use any notes or online

resources you would like, but you must not work with other students. How it will be marked:

Each of the 15 questions is worth 1 mark – partial marks are not awarded for questions where you can choose multiple answers.

You will not see your mark or any feedback until after marks are released.

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

3. General guidance and study support

Please refer to the module teaching materials in Minerva for any background support.

4. Assessment criteria and marking process

All code is graded solely on functionality – you must ensure that your code follows the brief exactly, and use the feedback from the grader to check that your code is passing the visible tests.

The passing mark for the assessment is 40% - you may obtain this grade through any combination of tasks/parts of tasks.

5. Presentation and referencing

If you use an idea in your solution that you have seen on the Web somewhere then add a comment to the code like this:

// I based this on an idea I found here:

// https://stackoverflow.com/questions/12901021/error-in-c-file-handling

If you use a book or a printed resource then give the author and title:

// I based this on an idea I got from here:

// An Introduction to C and GUI Programming by Simon Long, pages 56-57

This assignment is rated ORANGE for use of generative AI tools – this means that you may use generative AI tools in an assistive capacity, but must not generate any of your final answer directly from a generative AI tool.

You may not give any generative AI tool access to this brief or any part of this brief, nor ask it to write code for you.

You must reference any use of any generative AI by comment in the format below: // I based this on a discussion with ChatGPT

// Prompt: Explain how to import a CSV file in C

6. Submission requirements

Your code must:

- Be in C

- Compile on Linux with the following command: gcc *.c –o task

- Not be inside a subfolder (not in a zip)

UNIVERSITY OF LEEDS | SCHOOL OF COMPUTING

7. Academic misconduct and plagiarism

Leeds students are part of an academic community that shares ideas and develops new ones.

You need to learn how to work with others, how to interpret and present other people's ideas, and how to produce your own independent academic work. It is essential that you can distinguish between other people's work and your own, and correctly acknowledge other people's work.

All students new to the University are expected to complete an online Academic Integrity tutorial and test, and all Leeds students should ensure that they are aware of the principles of Academic integrity.

When you submit work for assessment it is expected that it will meet the University’s academic integrity standards.

If you do not understand what these standards are, or how they apply to your work, then please ask the module teaching staff for further guidance.

By submitting this assignment, you are confirming that the work is a true expression of your own work and ideas and that you have given credit to others where their work has contributed to yours.

8. Assessment/ marking criteria grid

  Task

Task 1 Task 2 Task 3 Task 4

Description

Reading Data Analysing Data Presenting Data Multiple choice quiz

Marks available

25 40 20 15

Total 100